Vendor Booth

Customizable Concession Booths

NobleVendor Booths

Perfect Solution for Concessions & Sales

Nobles can build a single 12’ x 12’ Vendor Booth or several 12’ x 12’ Booths connected in a row.  Customization options include adding Man Doors and rear Storage Areas with Man Doors between.

Each 12’ x 12’ Booth comes standard with a stainless steel countertop added to the front wall/door. Only available in increments of 12’ x 12’.

  • Empty metal frame and panel structure, possibly a shed or outdoor storage unit, with a partially open door, located outdoors on asphalt ground.
  • A small outdoor bar or kiosk with a metal frame, red walls, and a corrugated metal roof, situated in a grassy area with hills in the background.
  • Three green outdoor market stalls with metal roofs on a grassy area, surrounded by a wooden fence, with hills and cloudy sky in the background.
  • Two small food stands, one labeled 'The Coop' with chicken drumsticks and fries graphic, and the other labeled 'Nacho' with images of nachos, set against a parking lot backdrop with a metal fence and building.

We use  heavy 15 gauge round galvanized steel tubing to manufacture our Vendor Booths. Both 1 7/8” diameter and 1 5/8” diameter material we fabricate with is made right here in the USA. We chose this material for its superior strength and longevity. A round tube is stronger than a square or rectangular tube of equal weight and size. Like all Noble products, our Shelters have a galvanized finish for unequalled rust protection.

Our unique plywood mounting tab is used to secure ¾” plywood of any grade (not included) to a solid Vendor wall. This design allows each sheet of wood to be recessed inside the wall panel. There are no exposed edges or corners. When installed, each piece of wood will have a small air gap around the perimeter (approximately 1/8’ to ¼’).

 Our Vendor Booths are sold standard as a frame kit only.  Concrete Anchor Kit, Noble Board & Roof Metal/Trim are all sold separately.