Round Tube Event Stall Fronts   & Dividers

Highly Functional and Economical

Round Tube Event Stall Fronts & Dividers

Noble Event Stall Fronts and Dividers were designed to provide a quality stall at an affordable price.  They are made out of heavy 1 7/8 OD round 15 gauge galvanized steel tube with horizontal bars.  Each Event Stall Front & Divider is designed and built with plywood inserts that allow the plywood to be recessed into the stall wall. This leaves no exposed wood edges for hoses to chew on.  Inserts accept ¾” plywood which is not included. See Noble Board for available plywood options. 

Event Stall Fronts & Dividers are available in any length up to 16’ and can be custom made to fit your space. Optional Yoke in Door, Swing Out Feed Door, and Center Doors are available for these Stall Fronts.

A Practical Choice at an Affordable Price

Round Tube Event Fronts

These Stall Fronts come with a Swing Door (Sliding Door is not available).

Door can be placed on left side, right side, or center of Stall Front (center option is only available for Stall Fronts that are 12’, 14’ and 16’).

1 7/8” Horizontal Bars have 6 7/8” spacing.

Round Tube Event Dividers

The Round Tube Event Dividers are available in ½ Solid and Solid Wall options.  The ½ Solid Dividers may vary in look at the bottom, depending on the size.

  • “Workmanship and attention to detail has prevailed the test of time.”

    In 1993, we installed our 122 X 244 outdoor arena. There are many dealers and options in our area around greater Portland Oregon. After many hours of investigation is was all too clear to us which manufacture will be the wise choice for our facility at Mt Hood Equestrian Center, Boring Oregon.

     Noble Panels are light enough to handle and strong enough to endure the brutal punishment of rough stock from rodeos to all other disciplines that show here. Now, 17 years later, and the workmanship and attention to detail has prevailed the test of time. Our outdoor arena looks like it was installed last year! Our 80 portable show stalls, which we purchased from Noble Panels & Gates 2 years later have been used extensively and show virtually little wear and have been a safe home to thousands of horses that have shown here at Mt Hood Equestrian Center.

    I fully, with confidence, recommend Noble Panels & Gates for your livestock handling needs. For those who demand excellence, durability, and when safety is of utmost importance, Noble Panels & Gates is clearly the right choice.

    —Mike & Paula P., Mt Hood Equestrian Center

  • “Thank you for offering a product that we could afford.”

    Just installed our new Event Stall Fronts in our old barn.  We never thought we could afford to replace the old junker stall fronts that we had until we saw these in our neighbors barn. We didn’t need anything fancy and expensive, so your entry level stall fronts worked great for us.  We measured our existing space, ordered them and received a perfect fit.  Installation was really easy and didn’t even cause a divorce! 

    Thank you for offering a product that we could afford.

    —Jim and Pat L.