Call for Product Information:
800-437-3966

Horse Fencing

Fence Panels

Round Pens

Arenas

Paddocks

Contour Fence

Fence Gates

Swing Gates

Bowgates

Latches / Hinges

Horse Shelters

12 x 12

Loafing Shed

Shedrow

Horse Stalls

Stall Fronts

Dividers

Event Stalls

Horse Barns

Trainer Series

Horse Feeders

Corner Feeder

12 x 12 Shelters This Shelter measures 12’ x 12’ and is 8’ high in the front and slopes to 7’ high in the back. Plywood and roof material are not included in the price. The hardware for mounting 3/4” plywood (T-Nuts and Screws) are included in Shelter Kit.	Click for more Information
Shelter w/Paddock NOBLE PANELS & GATES will help you design and build Paddocks and Runs to fit your special needs. Available in 3, 4, 5 or 6 rails.	Click for more Information
Loafing Sheds The NOBLE 12 X 36 LOAFING SHED is the ideal pasture shelter when more room is needed. This LOAFING SHED measures 12’ deep by 24’ wide and is 8’ high in the front sloping to 7’ high in the back.	Click for more Information
Shedrows NOBLE SHELTER components may be ordered in a back-to-back Shedrow format. Adding the NOBLE EVENT STALL FRONT to these 12 x 12 Shelters gives you a very attractive and economical portable stall system.	Click for more Information

We use a heavy 15 Gauge Round Galvanized Tube to manufacture our shelters. Both the 1 -7/8” diameter and the 1 - 5/8” diameter material we fabricate with is milled for us to our specifications, and is made right here in the USA. We chose this material for it’s superior strength and longevity. A round tube is stronger than a square or rectangular tube of equal weight and size. Like all NOBLE products, our horse and livestock shelters have a galvanized finish for unequalled rust protection.

NOBLE SHELTERS with solid walls are fabricated to accept 3/4” plywood of any grade. A unique plywood mounting tab is used to secure each piece of wood in place. The plywood is cut to size (as per cut diagram) and is mounted against these mounting tabs with a T-Nut and Machine Screw supplied in each installation kit. This design allows each sheet of wood to be recessed inside the wall panel. There are no exposed edges or corners of wood for livestock to chew or crib on. When installed, each piece of wood will have a small air gap around its perimeter (approximately 1/8” to 1/4”). These perimeter openings offer solutions to commonly asked questions regarding lighting and ventilation. First, animals are most likely to enter a shelter when there is some lighting visible (ie. not a dark hole or box). Second, health issues arise when livestock is contained in poorly ventilated areas. Body heat and moisture can create health problems for many different animals where there is little ventilation.

NOBLE SHELTERS are quick and easy to erect. They come with a set of easy to read instructions and all hardware needed to assemble (less wood and roof material). For our solid wall shelters we even include a set of plywood cut diagrams and our recommendations for roof material. Shelter walls are assembled with our proven clamp system, using a 9/16” wrench. Our shelters may be anchored with either a drive-in wedge anchor or anchor post. Both are available as anchoring options.