Square Tube Horse Stall Dividers

Built with the safety & comfort of your horse in mind

Built with the safety & comfort of your horse in mind

Square Tube Stall Dividers may be ordered in a number of ways. They are custom built to your specifications. Solid Wall Dividers are available with either plywood inserts or 2x6 Tongue & Groove drop-in channels. We offer a divider with grills across the full width or with grills in 2/3rds of the width (remaining 1/3 is solid). The 2/3 Grilled Divider is designed to allow horses to socialize while still keeping a solid wall for feeding against. Each of these grilled walls may be ordered with either plywood inserts or Tongue & Groove channels. You may mount these dividers into existing barn post/beams or integrate them with Stall Fronts in a clear span building.
2/3 Grilled, 1/3 Solid Divider
Pictured here with Tongue & Groove inserts

2/3 Grilled, 1/3 Solid DividerSquare Tube Stall Front (Tongue & Groove Inserts)

Standard lengths are 10', 12', 14', and 16' with a height of 8'. Custom lengths and widths may be ordered. Available for Tongue & Groove inserts or to accept plywood inserts (wood products are not included).

The first 4' of the Divider is solid to 8' high with remaining length grilled on top. The 4' solid section is placed at the front of the stall and is used as a feeder mounting area. At feed time, horses eat without view of the animal in the adjoining stall (less agression and stress). The grill section will still allow great airflow and ventilation between stalls.
Full Width Grilled Divider
Pictured here with Tongue & Groove inserts

Full Width Grilled DividerFull Width Grilled Divider

Standard lengths are 10', 12', 14', and 16' with a height of 8'. Custom lengths and widths may be ordered. Available for Tongue & Groove inserts or to accept plywood inserts (wood products are not included).

This is a Full Width Divider that is solid on the lower half with vertical grills the full width of the top half.
Square Tube Divider Solid Plywood

Solid Divider with Plywood InsertsSolid Divider with Plywood Inserts

Standard lengths are 10', 12', 14', and 16' with a height of 8'. Custom lengths and widths may be ordered.

This Solid Divider is designed for use with 3/4" or 1" plywood (not included). The wood is inset between the uprights of the framework, leaving no exposed wood edges.
Solid Divider with Tongue & Groove Inserts

Solid Divider with Tongue & Groove InsertsSolid Divider with Tongue & Groove Inserts

Standard lengths are 10', 12', 14', and 16' with a height of 8'. Custom lengths and widths may be ordered.

This Solid Divider is designed for use with Tongue & Groove inserts. The wood is inset between the Tongue & Groove channels, leaving no exposed wood edges (wood not included).